山東永保機械是國內小叉車生產規模最大的廠家之一，是技術力量雄厚，產品系列檔次最全的設計制造企業。服務網點眾多，維修技師，配件供應充足，全國共有200多家經銷商。擁有一支高級技師組成的專業維修隊伍，隨時準備為用戶年生產能力達4000臺。那么在使用小叉車時應該注意什么呢？
  
1、設備啟動后，應注意傾聽有無異響，并對工作裝置進行空載運行。冬季工作，需帶水溫升至50攝氏度后方可進入工作狀態。
After the device starts up, you should pay attention to any abnormal sound to listen to, and work-load operation device. Winter work before entering the working state, the need to bring the water temperature rose to 50 degrees Celsius after.
2、注意觀察設備周圍有無人員和障礙物，確保安全后方能起步。配合其他工種作業時，嚴格按照作業方案服從指揮人員的指揮。
Observe whether the personnel and equipment around obstacles in order to ensure safety after the start. When operating in conjunction with other types of work, in strict accordance with the operating plan obey the command of the command staff.  
3、行使時，最高時速不超過5KM一小時，不猛打方向、不急轉彎，駕駛室外不準載人。行駛時，吊具應收至20尺箱位距離，行使中不隨意伸展、升降吊具。作業半徑內嚴禁站人，作業時，吊具、貨物下嚴禁人員、車輛停留、通過。給托板裝卸集裝箱時，嚴禁駕駛室從箱體下經過。
When exercised, the maximum speed of not more than 5KM one hour, the direction is not too hard, not a sharp turn, allowed manned outside the cab. When traveling to a 20-foot container spreader bit receivable from the exercise are not free to stretch, lift spreader. Within the operating radius is prohibited to stand, when the job under spreader, goods prohibited personnel, vehicles stop by. When to pallet loading and unloading containers from the cabinet after the cab is prohibited. 
4、推碼集裝箱時，嚴禁用叉車橫推箱體，以防箱縫中站人、擺物，造成傷害事故。當垛高超過4.5米，垛后又無靠山時，嚴禁叉車從垛上叉箱。
When push code containers, non-cross with a forklift to push the box to prevent the box crevices station who put objects, causing injury. When the stack height over 4.5 m, then no patron stack prohibited forklift fork box from the stack.

山東永保機械期待與您的合作，我公司在長期與廣大新老客戶的合作中積累了豐富的經驗，使得我們的小叉車在同行業中更具獨特性，深受廣大用戶的青睞和好評。

濟南裝載機：http://m.lcsqtax.cn/